[1]刘 敏,徐正茂,王琳琳. 3D打印技术模型在颌面部缺损修复手术中的应用探讨[J].中国美容医学,2021,(8):156-158.
　 LIU Min,XU Zheng-mao,WANG Lin-lin. The Auxiliary Value of 3D Printing Technology in Maxillofacial Defect Repair[J].Medical Aesthetics and Beauty,2021,(8):156-158.
点击复制

 3D打印技术模型在颌面部缺损修复手术中的应用探讨
()
分享到：

《中国美容医学》[ISSN:1008-6445/CN:61-1347/R]

卷:
期数:
2021年8期
页码:
156-158
栏目:
出版日期:
2021-08-10

文章信息/Info

Title:
 The Auxiliary Value of 3D Printing Technology in Maxillofacial Defect Repair
文章编号:
1008-6455(2021)08-0156-03
作者:
刘 敏; 徐正茂; 王琳琳
Author(s):
 LIU Min; XU Zheng-mao; WANG Lin-lin
关键词:
 [关键词]3D打印; 颌面部; 缺损; 修复; 咬合; 满意度; 不良反应
Keywords:
 Key words: 3D Printing;  maxillofacial;  defect;  repair;  occlusion;  satisfaction;  adverse reactions
分类号:
R782.4
文献标志码:
A
摘要:
[摘要]目的：探讨3D打印技术模型在颌面部缺损修复手术中的应用。方法：前瞻性选取2018年2月-2019年5月在笔者医院口
腔颌面外科就诊的需要进行颌面部缺损修复的患者78例，随机数字表法分为实验组（n =39）和对照组（n =39），实验组采用
3D打印技术模型辅助修复，对照组为常规手术修复。并对两组手术情况、面部咬合情况、患者满意度以及不良反应发生情况
进行比较。结果：实验组面部咬合优良率为82.05%，高于对照组的58.97%（P ＜0.05），两组比较差异具有统计学意义。实
验组的手术时间、术中出血量和不良反应发生率均显著低于对照组（P ＜0.05），且不良反应的发生率为7.69%，远低于对照
组的20.51%，外貌满意度评分显著高于对照组（P ＜0.05），差异均具有统计学意义。结论：3D打印技术在颌面部缺损修复
中，疗效显著，患者对于修复后外貌也较传统手术修复方法更为满意，可在临床进一步推广使用。

Abstract:

Abstract: Objective To explore the application of 3D printing technology model in maxillofacial defect repair surgery.
Methods Prospective selection of patients in our hospital from February 2018 to May 2019 in oral and maxillofacial surgery in
need of maxillofacial defect repair, and they were divided into experimental group (n =39) and control group (n =39) according
to the random number table method. The experimental group was assisted by 3D printing technology model, while the control
group was repaired by routine surgery. The surgery, facial occlusion, patient satisfaction and adverse reactions were compared
between two groups. Results The excellent and good rate of facial occlusion in the experimental group was 82.05%, which
was higher than that in the control group (58.97%) (P ＜0.05), the difference was statistically significant.The operation time,
intraoperative blood loss and adverse reaction rate in the 3D printing repair group were significantly lower than those in
the control group (P ＜0.05), and the incidence of adverse reactions was 7.69%, which was much lower than that in the
control group (20.51%), and the score of degree in the experimental group was significantly higher than that inthe control
group (P ＜0.05), the difference was statistically significant. Conclusion 3D printing technology has a significant effect in the
repair of maxillofacial defects and the patient’s appearance after repair is more satisfactory than the traditional surgical repair
method, and can be further promoted in clinical use.

相似文献/References:

[1]陈燕图,刘伟源,许贤君. 医用粘合剂配合整形外科技术修复颌面部创伤效果观察[J].中国美容医学,2018,(04):25.
　CHEN Yan-tu,LIU Wei-yuan,XU Xian-jun. Efficacy Observation of the Medical Adhesive Combined with Plastic Surgery Technology for Repairing Maxillofacial Trauma[J].Medical Aesthetics and Beauty,2018,(8):25.
[2]胡广伟,王 鸿,王 涛,等. 血管吻合器在游离组织瓣修复颌面缺损中的应用[J].中国美容医学,2018,(06):119.
　HU Guang-wei,WANG Hong,WANG Tao,et al. The Application of Vascular Anastomotic Device for Free Tissue Flap Transfer in Patients with Oral and Maxillofacial Defects[J].Medical Aesthetics and Beauty,2018,(8):119.
[3]欧阳志强,罗 玲,熊 宇. 口腔正畸美学的认知与临床教学实施探讨[J].中国美容医学,2019,(03):143.
　OUYANG Zhi-qiang,LUO Ling,XIONG Yu. Discussion on Clinical Esthetic Education Based on the Cognition of Orthodontic Esthetics[J].Medical Aesthetics and Beauty,2019,(8):143.
[4] 张秀琴,刘振华,周俊宏. 3D打印技术在种植牙患者中的应用价值探究[J].中国美容医学,2020,(7):145.
　 ZHANG Xiu-qin,LIU Zhen-hua,ZHOU Jun-hong. Application Value of 3D Printing Technology in Implant Patients[J].Medical Aesthetics and Beauty,2020,(8):145.
[5] 张永生,李鹏飞,华 英,等. 携带双侧颞浅动静脉的额部扩张皮瓣修复颌面部瘢痕[J].中国美容医学,2021,(5):19.
　 ZHANG Yong-sheng,LI Peng-fei,HUA Ying,et al. Repair of Maxillofacial Scar with Expanded Forehead Flap with Bilateral SuperficialTemporal Artery and Vein[J].Medical Aesthetics and Beauty,2021,(8):19.
[6]吕 波,陈 兴,周 汛,等.美容缝合技术在颌面部外伤清创处理中的应用效果分析[J].中国美容医学,2022,(5):106.
　LYU Bo,CHEN Xing,ZHOU Xun,et al.Analysis of the Application Effect of Cosmetic Suture Technique in the Treatment of Maxillofacial Trauma[J].Medical Aesthetics and Beauty,2022,(8):106.
[7]薛启元,朱 正,王晓芳.改良式减张美容缝合术在颌面部外伤患者中的应用效果分析[J].中国美容医学,2023,(11):46.[doi:10.15909/j.cnki.cn61-1347/r.005997]
　XUE Qiyuan,ZHU Zheng,WANG Xiaofang.Analysis of the Application Effect of Modifi ed Tension-reduction Cosmetic Suture in Patients with Maxillofacial Trauma[J].Medical Aesthetics and Beauty,2023,(8):46.[doi:10.15909/j.cnki.cn61-1347/r.005997]
[8]刘 喆,刘 敏,葛苏蒙,等.游离前臂皮瓣与股前外侧皮瓣修复口腔癌术后缺损的疗效及对伤口美观度的影响[J].中国美容医学,2023,(12):74.[doi:10.15909/j.cnki.cn61-1347/r.006033]
　LIU Zhe,LIU Min,GE Sumeng,et al.Effect of Free Forearm Flap and Anterolateral Thigh Flap on Defect Repair after Oral Cancer Surgery and Its Infl uence on Wound Aesthetics[J].Medical Aesthetics and Beauty,2023,(8):74.[doi:10.15909/j.cnki.cn61-1347/r.006033]
[9]胡曙光,胡利兵,程媛媛.固定矫治联合微种植体支抗在青少年安氏Ⅱ类错牙合畸形治疗中的应用[J].中国美容医学,2024,(3):135.
　HU Shuguang,HU Libing,CHENG Yuanyuan.Application of Fixed Orthodontics Combined with Micro-implant Anchorage in the Treatment of Class Malocclusion in Adolescents[J].Medical Aesthetics and Beauty,2024,(8):135.
[10]周 晴,朱利红,王 芳,等.基于健康行为改变整合理论的健康教育对颌面部外伤整形患者创面愈合的 影响[J].中国美容医学,2024,(4):172.
　ZHOU Qing,ZHU Lihong,WANG Fang,et al.Infl uence of Health Education Based on the Integration Theory of Health Behavior Change on Wound Healing of Patients with Maxillofacial Trauma and Plastic Surgery?/html>[J].Medical Aesthetics and Beauty,2024,(8):172.

更新日期/Last Update: 2021-09-10